Six uses of aluminum foil Butyl Tape:
1. Roof waterproofing, underground waterproofing, waterproofing treatment of structural construction joints and lap sealing of polymer waterproofing membranes for new projects;
2. Sealing and waterproofing of construction joints of subway tunnel structures in municipal engineering;
3. Airtight, waterproof and shock-absorbing at the joints of the color profiled plate. Aluminum foil butyl tape is suitable for airtightness, waterproofness and shock absorption at the joints in the solar panel project;
4. Bonding and sealing treatment in automobile assembly;
5. Waterproof sealing treatment of the meeting place in the construction of steel structure;
6. Aluminum foil butyl tape is suitable for waterproof sealing of various civil roofs, color steel, steel structures, waterproof membranes, PC boards, etc. under sunlight.
The construction operation process of aluminum foil butyl tape is simple:
1. Position the coil material and leave the overlap width of the coil material seam and paste it. The waterproofing membrane is fully covered; when the overlapped part of the membrane is used with adhesive and tape, the overlapped width of the coiled material is 80MM-100MM, and the width of the tape is 15MM-25MM.
2. When the overlapping part of the coil is only bonded with tape, the overlapping width of the coil is 50MM.
3. The waterproofing membrane is empty; the overlapping parts of the membrane are bonded with tape, and the overlapping width of the membrane is 60MM.
4. For projects with a higher waterproof level, 25MM single-sided non-woven tape can be used for edge sealing at the interface.
5. It is used for the bonding between the coil and the coil, and the coil and the base layer; the single-sided  Tanyo foil butyl tape is used for the anti-lap joint and the sealing bonding of the port